Tap Flow Meter Gauge
Install at tap to measure water usage accurately
Product Video
See it in action! Watch a video featuring this product to learn more.
The Tap Flow Meter Gauge is a useful device for measuring how much water you use for a variety of tasks.
The gauge screws straight onto your tap with no extra fittings required. It measures 2 amounts: the volume of water per watering session and the accumulated water usage up to 999 litres.
The device resets the single use water usage meter when left inactive for 30 minutes. It will hold the cumulative usage amount until it is reset.
Screws straight onto your tap. No extra fittings required. Measures single use plus accumulated water usage up to 999 litres.
It can be useful to see how much water is required to wash your car, or the total amount of water used to water your garden.
Accuracy of the flow meter gauge is expected to be above 95% but this can vary slightly depending on a number of variables. It should be noted this product is NOT a commercial measuring device. Suitable for use with both 12mm and 18mm hose fittings.
Battery installed.
Product Specifications
Tap Thread Fitting Size 25mm (1”) and 20mm (¾”) with included reducer
Requires a minimum of 40psi.
Includes a 3 volt CR2032 battery.
Warranty
12 months
